Wrought Iron Floor Candelabra
A wrought-iron floor candelabra that stands about 5.4 ft tall: six scrolled arms curl out near the top to hold real taper candles, rising from a slim central stem on a footed, scrolled tripod base. Hand-forged in matte black iron, it brings a candlelit, old-world mood to an entryway, a fireplace corner, a dining room, or a wedding and event setup. Fits standard tapers up to about 0.87″ across.
Open-flame safety
This holds real burning candles. Never leave lit candles unattended; keep flames clear of curtains, garlands, and anything flammable; place on a level surface away from children and pets; and extinguish before leaving the room.
Six scrolled iron arms
Hand-forged wrought-iron arms curl out to hold six taper candles in a candelabra form.
Tall floor-standing
About 64.6″ (5.4 ft) tall on a footed, scrolled tripod base — a freestanding floor piece.
Fits standard tapers
Cups take dinner/taper candles up to about 0.87″ (2.2 cm) in diameter.
Pairs & event quantities
Planning a wedding, restaurant, or event look? For matched pairs or larger quantities, email us your numbers and timeline and we'll help you set it up.
Click to enlarge ↗
Click the diagram to enlarge.
Click to enlarge ↗
| Material | Iron |
| Finish | Matte black |
| Overall size | 25.2″ W × 25.2″ D × 64.6″ H (64 × 64 × 164 cm) |
| Base width | 17.3″ (44 cm) scrolled tripod |
| Holders | Six candle arms |
| Candle fit | Taper candles up to 0.87″ (2.2 cm) diameter |
| Type | Freestanding floor candelabra (real wax candles) |
| Use | Indoor — entryway, fireplace corner, dining room, events |
- Freestanding — no assembly to the wall; set it on a level, hard floor away from foot traffic so it can't be knocked over.
- Use taper candles up to 0.87″ (2.2 cm); trim wicks to about ¼″ before lighting for a cleaner, lower flame.
- Let wax cool, then peel or gently scrape drips from the iron; wipe with a dry, soft cloth.
- Keep it indoors and dry — iron can rust in damp or outdoor spots; if used at an outdoor event, bring it in afterward.
- The finish is applied by hand, so shading varies slightly from piece to piece.
What candles fit, and how many does it hold?
It holds six taper (dinner) candles up to about 0.87″ (2.2 cm) in diameter. Trim wicks to roughly ¼″ before lighting, and use drip-catchers if you want to keep the iron clean.
How tall is it, and is it stable?
It stands about 64.6″ (5.4 ft) tall on a footed, scrolled tripod base around 17.3″ across. Set it on a level, hard floor away from foot traffic; the wide base helps keep it steady.
Can I use it outdoors?
It's wrought iron, best kept indoors and dry. A covered patio or a short outdoor event is fine, but bring it back inside afterward — moisture can cause the iron to rust.
How do I burn the candles safely?
Never leave lit candles unattended; keep flames away from curtains, garlands, and anything flammable; place it on a stable, level surface away from children and pets; and extinguish the candles before leaving the room.
What's the warranty, and can I get several for an event?
It carries a 2-year warranty on the finish and construction. For pairs or quantities for weddings and events, email [email protected] — we reply within one business day.
Original: $650.00
-70%$650.00
$195.00More Images
Wrought Iron Floor Candelabra
A wrought-iron floor candelabra that stands about 5.4 ft tall: six scrolled arms curl out near the top to hold real taper candles, rising from a slim central stem on a footed, scrolled tripod base. Hand-forged in matte black iron, it brings a candlelit, old-world mood to an entryway, a fireplace corner, a dining room, or a wedding and event setup. Fits standard tapers up to about 0.87″ across.
Open-flame safety
This holds real burning candles. Never leave lit candles unattended; keep flames clear of curtains, garlands, and anything flammable; place on a level surface away from children and pets; and extinguish before leaving the room.
Six scrolled iron arms
Hand-forged wrought-iron arms curl out to hold six taper candles in a candelabra form.
Tall floor-standing
About 64.6″ (5.4 ft) tall on a footed, scrolled tripod base — a freestanding floor piece.
Fits standard tapers
Cups take dinner/taper candles up to about 0.87″ (2.2 cm) in diameter.
Pairs & event quantities
Planning a wedding, restaurant, or event look? For matched pairs or larger quantities, email us your numbers and timeline and we'll help you set it up.
Click to enlarge ↗
Click the diagram to enlarge.
Click to enlarge ↗
| Material | Iron |
| Finish | Matte black |
| Overall size | 25.2″ W × 25.2″ D × 64.6″ H (64 × 64 × 164 cm) |
| Base width | 17.3″ (44 cm) scrolled tripod |
| Holders | Six candle arms |
| Candle fit | Taper candles up to 0.87″ (2.2 cm) diameter |
| Type | Freestanding floor candelabra (real wax candles) |
| Use | Indoor — entryway, fireplace corner, dining room, events |
- Freestanding — no assembly to the wall; set it on a level, hard floor away from foot traffic so it can't be knocked over.
- Use taper candles up to 0.87″ (2.2 cm); trim wicks to about ¼″ before lighting for a cleaner, lower flame.
- Let wax cool, then peel or gently scrape drips from the iron; wipe with a dry, soft cloth.
- Keep it indoors and dry — iron can rust in damp or outdoor spots; if used at an outdoor event, bring it in afterward.
- The finish is applied by hand, so shading varies slightly from piece to piece.
What candles fit, and how many does it hold?
It holds six taper (dinner) candles up to about 0.87″ (2.2 cm) in diameter. Trim wicks to roughly ¼″ before lighting, and use drip-catchers if you want to keep the iron clean.
How tall is it, and is it stable?
It stands about 64.6″ (5.4 ft) tall on a footed, scrolled tripod base around 17.3″ across. Set it on a level, hard floor away from foot traffic; the wide base helps keep it steady.
Can I use it outdoors?
It's wrought iron, best kept indoors and dry. A covered patio or a short outdoor event is fine, but bring it back inside afterward — moisture can cause the iron to rust.
How do I burn the candles safely?
Never leave lit candles unattended; keep flames away from curtains, garlands, and anything flammable; place it on a stable, level surface away from children and pets; and extinguish the candles before leaving the room.
What's the warranty, and can I get several for an event?
It carries a 2-year warranty on the finish and construction. For pairs or quantities for weddings and events, email [email protected] — we reply within one business day.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A wrought-iron floor candelabra that stands about 5.4 ft tall: six scrolled arms curl out near the top to hold real taper candles, rising from a slim central stem on a footed, scrolled tripod base. Hand-forged in matte black iron, it brings a candlelit, old-world mood to an entryway, a fireplace corner, a dining room, or a wedding and event setup. Fits standard tapers up to about 0.87″ across.
Open-flame safety
This holds real burning candles. Never leave lit candles unattended; keep flames clear of curtains, garlands, and anything flammable; place on a level surface away from children and pets; and extinguish before leaving the room.
Six scrolled iron arms
Hand-forged wrought-iron arms curl out to hold six taper candles in a candelabra form.
Tall floor-standing
About 64.6″ (5.4 ft) tall on a footed, scrolled tripod base — a freestanding floor piece.
Fits standard tapers
Cups take dinner/taper candles up to about 0.87″ (2.2 cm) in diameter.
Pairs & event quantities
Planning a wedding, restaurant, or event look? For matched pairs or larger quantities, email us your numbers and timeline and we'll help you set it up.
Click to enlarge ↗
Click the diagram to enlarge.
Click to enlarge ↗
| Material | Iron |
| Finish | Matte black |
| Overall size | 25.2″ W × 25.2″ D × 64.6″ H (64 × 64 × 164 cm) |
| Base width | 17.3″ (44 cm) scrolled tripod |
| Holders | Six candle arms |
| Candle fit | Taper candles up to 0.87″ (2.2 cm) diameter |
| Type | Freestanding floor candelabra (real wax candles) |
| Use | Indoor — entryway, fireplace corner, dining room, events |
- Freestanding — no assembly to the wall; set it on a level, hard floor away from foot traffic so it can't be knocked over.
- Use taper candles up to 0.87″ (2.2 cm); trim wicks to about ¼″ before lighting for a cleaner, lower flame.
- Let wax cool, then peel or gently scrape drips from the iron; wipe with a dry, soft cloth.
- Keep it indoors and dry — iron can rust in damp or outdoor spots; if used at an outdoor event, bring it in afterward.
- The finish is applied by hand, so shading varies slightly from piece to piece.
What candles fit, and how many does it hold?
It holds six taper (dinner) candles up to about 0.87″ (2.2 cm) in diameter. Trim wicks to roughly ¼″ before lighting, and use drip-catchers if you want to keep the iron clean.
How tall is it, and is it stable?
It stands about 64.6″ (5.4 ft) tall on a footed, scrolled tripod base around 17.3″ across. Set it on a level, hard floor away from foot traffic; the wide base helps keep it steady.
Can I use it outdoors?
It's wrought iron, best kept indoors and dry. A covered patio or a short outdoor event is fine, but bring it back inside afterward — moisture can cause the iron to rust.
How do I burn the candles safely?
Never leave lit candles unattended; keep flames away from curtains, garlands, and anything flammable; place it on a stable, level surface away from children and pets; and extinguish the candles before leaving the room.
What's the warranty, and can I get several for an event?
It carries a 2-year warranty on the finish and construction. For pairs or quantities for weddings and events, email [email protected] — we reply within one business day.
