Stacked Pebble Wood Table Lamp
A sculptural table lamp built from a stack of hand-carved solid-wood pebbles, balanced one above the other, finished with a soft cream fabric cone shade. A rotary knob on the cord dims the included 10W warm-white LED bulb smoothly from a night-light glow to full brightness. Pick from five wood finishes — solid Light Wood, Dark Wood, Matte Black, or two mixed combinations — in either Small (∅ 13.8″ × H 17.7″) or Large (∅ 17.7″ × H 21.7″) sizes for a bedside, sideboard, console, or living-room side table.
Stacked pebble form
Hand-carved solid-wood pebbles balanced one above the next — a quiet sculptural stack with the visual feel of stones rested on a riverbank.
Rotary stepless dimmer
Turn the knob on the cord to dim smoothly from a night-light glow to full brightness — no remote, no buttons.
LED bulb included
Ships with a 10W warm-white E27 LED bulb — plug in and you're lit, no extra trip to the hardware store.
10W E27 warm-white LED bulb included
Unlike most fixtures, the lamp ships with the bulb already specified — a 10W E27 (standard screw base) LED in warm-white tone. Plug into a wall outlet, turn the rotary knob, and you have light. When the bulb eventually burns out, replace with any standard E27 LED bulb up to 10W — warm-white at 2700–3000K matches the original.
Five wood finishes, two sizes
Three solid finishes (Light Wood, Dark Wood, Matte Black) and two mixed-stack arrangements (Light + Dark, Light + Black) — the mixes alternate pebble colors up the stack for visual interest. All ten options share the same cream cone fabric shade and the same hand-carved pebble silhouettes. For project quantities or a custom mix arrangement, email us before ordering.
Dimension sheets for each size. Click to enlarge.
Click either diagram to view full size ↗
| Dimensions | Small: ∅ 13.8″ x H 17.7″ (∅ 35 x H 45 cm) · base ∅ 7.9″ (200 mm) · shade ∅ 13.8″ (350 mm) Large: ∅ 17.7″ x H 21.7″ (∅ 45 x H 55 cm) · base ∅ 9.8″ (250 mm) · shade ∅ 17.7″ (450 mm) |
| Net weight | Small ~2.2 kg · Large ~3.3 kg |
| Material | Solid wood (species varies) for pebble stack and base, fabric for cone shade |
| Finish | Light Wood, Dark Wood, Matte Black, Light + Dark Wood Mix, or Light Wood + Matte Black Mix (choose above) |
| Shade | Cream fabric cone, fixed (shared across all 10 variants) |
| Light source | 1 × E27 socket · 10W warm-white LED bulb included |
| Control | Rotary stepless dimmer on cord (dims from near-off to full brightness) |
| Voltage | 120V (AC 110–240V global) |
| Power | Plug-in, free-standing — indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Place on a flat, stable surface — the base is wide and the lamp is bottom-heavy, so it sits firmly.
- The bulb is pre-installed inside the shade. Lift the shade gently to verify it's seated in the E27 socket before plugging in.
- Plug the cord into a standard wall outlet. The rotary dimmer knob sits in-line on the cord — turn clockwise to brighten, counter-clockwise to dim toward off.
- The stepless dimmer has no preset stops. Adjust to any level between near-off and full bright.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the wooden pebbles and shade with a soft, dry cloth. Avoid water on the wood, which can mark the finish over time. For the fabric shade, a soft lint roller lifts pet hair without damaging the weave.
Which finish and size suit my room?
Light Wood reads bright and Scandinavian — pairs with oak floors and white walls. Dark Wood is warm and traditional — works in rooms with walnut furniture or dark accents. Matte Black is graphic and contemporary — best against light walls where the silhouette stands out. The Light + Dark and Light + Black Mixes alternate pebble colors up the stack for visual play. Small (∅ 35 cm) sits well on a bedside, nightstand, or narrow console; Large (∅ 45 cm) suits a sideboard, living-room side table, or anywhere it can take more visual weight.
What's included in the box?
The lamp (assembled pebble stack with base and fabric shade attached), a 10W warm-white E27 LED bulb already installed in the socket, and a plug-in cord with a rotary dimmer knob in-line. Plug into a wall outlet, turn the knob, and the lamp is on.
How does the rotary dimmer work?
A small rotary knob sits on the power cord between the lamp and the plug. Turn clockwise to brighten, counter-clockwise to dim toward off — the dimmer is stepless, so you can land anywhere between a low night-light glow and full brightness. There's no remote, no buttons, and no preset levels. Some users find a stepless dimmer more intuitive than tap-cycle dimmers.
Will the wood grain and color look exactly like the photos?
The pebbles are hand-carved from solid wood, so the grain pattern, knot placement, and exact tone vary subtly between pieces. The photos are representative — every lamp sits in the same family, but small variation is normal and part of the material. For the Mix finishes, the alternating sequence of light and dark pebbles is consistent in form but each piece has its own grain.
What if the bulb burns out? What is the warranty?
Replace with any standard E27 (screw base) LED bulb up to 10W; warm-white at 2700–3000K matches the original. The lamp itself carries a 2-year warranty against manufacturing defects in the wiring, dimmer, and socket. Email support with your order number if anything arrives damaged or fails in normal use. Surface scuffs and natural wood variation are not covered.
Original: $565.00
-70%$565.00
$169.50More Images
Stacked Pebble Wood Table Lamp
A sculptural table lamp built from a stack of hand-carved solid-wood pebbles, balanced one above the other, finished with a soft cream fabric cone shade. A rotary knob on the cord dims the included 10W warm-white LED bulb smoothly from a night-light glow to full brightness. Pick from five wood finishes — solid Light Wood, Dark Wood, Matte Black, or two mixed combinations — in either Small (∅ 13.8″ × H 17.7″) or Large (∅ 17.7″ × H 21.7″) sizes for a bedside, sideboard, console, or living-room side table.
Stacked pebble form
Hand-carved solid-wood pebbles balanced one above the next — a quiet sculptural stack with the visual feel of stones rested on a riverbank.
Rotary stepless dimmer
Turn the knob on the cord to dim smoothly from a night-light glow to full brightness — no remote, no buttons.
LED bulb included
Ships with a 10W warm-white E27 LED bulb — plug in and you're lit, no extra trip to the hardware store.
10W E27 warm-white LED bulb included
Unlike most fixtures, the lamp ships with the bulb already specified — a 10W E27 (standard screw base) LED in warm-white tone. Plug into a wall outlet, turn the rotary knob, and you have light. When the bulb eventually burns out, replace with any standard E27 LED bulb up to 10W — warm-white at 2700–3000K matches the original.
Five wood finishes, two sizes
Three solid finishes (Light Wood, Dark Wood, Matte Black) and two mixed-stack arrangements (Light + Dark, Light + Black) — the mixes alternate pebble colors up the stack for visual interest. All ten options share the same cream cone fabric shade and the same hand-carved pebble silhouettes. For project quantities or a custom mix arrangement, email us before ordering.
Dimension sheets for each size. Click to enlarge.
Click either diagram to view full size ↗
| Dimensions | Small: ∅ 13.8″ x H 17.7″ (∅ 35 x H 45 cm) · base ∅ 7.9″ (200 mm) · shade ∅ 13.8″ (350 mm) Large: ∅ 17.7″ x H 21.7″ (∅ 45 x H 55 cm) · base ∅ 9.8″ (250 mm) · shade ∅ 17.7″ (450 mm) |
| Net weight | Small ~2.2 kg · Large ~3.3 kg |
| Material | Solid wood (species varies) for pebble stack and base, fabric for cone shade |
| Finish | Light Wood, Dark Wood, Matte Black, Light + Dark Wood Mix, or Light Wood + Matte Black Mix (choose above) |
| Shade | Cream fabric cone, fixed (shared across all 10 variants) |
| Light source | 1 × E27 socket · 10W warm-white LED bulb included |
| Control | Rotary stepless dimmer on cord (dims from near-off to full brightness) |
| Voltage | 120V (AC 110–240V global) |
| Power | Plug-in, free-standing — indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Place on a flat, stable surface — the base is wide and the lamp is bottom-heavy, so it sits firmly.
- The bulb is pre-installed inside the shade. Lift the shade gently to verify it's seated in the E27 socket before plugging in.
- Plug the cord into a standard wall outlet. The rotary dimmer knob sits in-line on the cord — turn clockwise to brighten, counter-clockwise to dim toward off.
- The stepless dimmer has no preset stops. Adjust to any level between near-off and full bright.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the wooden pebbles and shade with a soft, dry cloth. Avoid water on the wood, which can mark the finish over time. For the fabric shade, a soft lint roller lifts pet hair without damaging the weave.
Which finish and size suit my room?
Light Wood reads bright and Scandinavian — pairs with oak floors and white walls. Dark Wood is warm and traditional — works in rooms with walnut furniture or dark accents. Matte Black is graphic and contemporary — best against light walls where the silhouette stands out. The Light + Dark and Light + Black Mixes alternate pebble colors up the stack for visual play. Small (∅ 35 cm) sits well on a bedside, nightstand, or narrow console; Large (∅ 45 cm) suits a sideboard, living-room side table, or anywhere it can take more visual weight.
What's included in the box?
The lamp (assembled pebble stack with base and fabric shade attached), a 10W warm-white E27 LED bulb already installed in the socket, and a plug-in cord with a rotary dimmer knob in-line. Plug into a wall outlet, turn the knob, and the lamp is on.
How does the rotary dimmer work?
A small rotary knob sits on the power cord between the lamp and the plug. Turn clockwise to brighten, counter-clockwise to dim toward off — the dimmer is stepless, so you can land anywhere between a low night-light glow and full brightness. There's no remote, no buttons, and no preset levels. Some users find a stepless dimmer more intuitive than tap-cycle dimmers.
Will the wood grain and color look exactly like the photos?
The pebbles are hand-carved from solid wood, so the grain pattern, knot placement, and exact tone vary subtly between pieces. The photos are representative — every lamp sits in the same family, but small variation is normal and part of the material. For the Mix finishes, the alternating sequence of light and dark pebbles is consistent in form but each piece has its own grain.
What if the bulb burns out? What is the warranty?
Replace with any standard E27 (screw base) LED bulb up to 10W; warm-white at 2700–3000K matches the original. The lamp itself carries a 2-year warranty against manufacturing defects in the wiring, dimmer, and socket. Email support with your order number if anything arrives damaged or fails in normal use. Surface scuffs and natural wood variation are not covered.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A sculptural table lamp built from a stack of hand-carved solid-wood pebbles, balanced one above the other, finished with a soft cream fabric cone shade. A rotary knob on the cord dims the included 10W warm-white LED bulb smoothly from a night-light glow to full brightness. Pick from five wood finishes — solid Light Wood, Dark Wood, Matte Black, or two mixed combinations — in either Small (∅ 13.8″ × H 17.7″) or Large (∅ 17.7″ × H 21.7″) sizes for a bedside, sideboard, console, or living-room side table.
Stacked pebble form
Hand-carved solid-wood pebbles balanced one above the next — a quiet sculptural stack with the visual feel of stones rested on a riverbank.
Rotary stepless dimmer
Turn the knob on the cord to dim smoothly from a night-light glow to full brightness — no remote, no buttons.
LED bulb included
Ships with a 10W warm-white E27 LED bulb — plug in and you're lit, no extra trip to the hardware store.
10W E27 warm-white LED bulb included
Unlike most fixtures, the lamp ships with the bulb already specified — a 10W E27 (standard screw base) LED in warm-white tone. Plug into a wall outlet, turn the rotary knob, and you have light. When the bulb eventually burns out, replace with any standard E27 LED bulb up to 10W — warm-white at 2700–3000K matches the original.
Five wood finishes, two sizes
Three solid finishes (Light Wood, Dark Wood, Matte Black) and two mixed-stack arrangements (Light + Dark, Light + Black) — the mixes alternate pebble colors up the stack for visual interest. All ten options share the same cream cone fabric shade and the same hand-carved pebble silhouettes. For project quantities or a custom mix arrangement, email us before ordering.
Dimension sheets for each size. Click to enlarge.
Click either diagram to view full size ↗
| Dimensions | Small: ∅ 13.8″ x H 17.7″ (∅ 35 x H 45 cm) · base ∅ 7.9″ (200 mm) · shade ∅ 13.8″ (350 mm) Large: ∅ 17.7″ x H 21.7″ (∅ 45 x H 55 cm) · base ∅ 9.8″ (250 mm) · shade ∅ 17.7″ (450 mm) |
| Net weight | Small ~2.2 kg · Large ~3.3 kg |
| Material | Solid wood (species varies) for pebble stack and base, fabric for cone shade |
| Finish | Light Wood, Dark Wood, Matte Black, Light + Dark Wood Mix, or Light Wood + Matte Black Mix (choose above) |
| Shade | Cream fabric cone, fixed (shared across all 10 variants) |
| Light source | 1 × E27 socket · 10W warm-white LED bulb included |
| Control | Rotary stepless dimmer on cord (dims from near-off to full brightness) |
| Voltage | 120V (AC 110–240V global) |
| Power | Plug-in, free-standing — indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Place on a flat, stable surface — the base is wide and the lamp is bottom-heavy, so it sits firmly.
- The bulb is pre-installed inside the shade. Lift the shade gently to verify it's seated in the E27 socket before plugging in.
- Plug the cord into a standard wall outlet. The rotary dimmer knob sits in-line on the cord — turn clockwise to brighten, counter-clockwise to dim toward off.
- The stepless dimmer has no preset stops. Adjust to any level between near-off and full bright.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the wooden pebbles and shade with a soft, dry cloth. Avoid water on the wood, which can mark the finish over time. For the fabric shade, a soft lint roller lifts pet hair without damaging the weave.
Which finish and size suit my room?
Light Wood reads bright and Scandinavian — pairs with oak floors and white walls. Dark Wood is warm and traditional — works in rooms with walnut furniture or dark accents. Matte Black is graphic and contemporary — best against light walls where the silhouette stands out. The Light + Dark and Light + Black Mixes alternate pebble colors up the stack for visual play. Small (∅ 35 cm) sits well on a bedside, nightstand, or narrow console; Large (∅ 45 cm) suits a sideboard, living-room side table, or anywhere it can take more visual weight.
What's included in the box?
The lamp (assembled pebble stack with base and fabric shade attached), a 10W warm-white E27 LED bulb already installed in the socket, and a plug-in cord with a rotary dimmer knob in-line. Plug into a wall outlet, turn the knob, and the lamp is on.
How does the rotary dimmer work?
A small rotary knob sits on the power cord between the lamp and the plug. Turn clockwise to brighten, counter-clockwise to dim toward off — the dimmer is stepless, so you can land anywhere between a low night-light glow and full brightness. There's no remote, no buttons, and no preset levels. Some users find a stepless dimmer more intuitive than tap-cycle dimmers.
Will the wood grain and color look exactly like the photos?
The pebbles are hand-carved from solid wood, so the grain pattern, knot placement, and exact tone vary subtly between pieces. The photos are representative — every lamp sits in the same family, but small variation is normal and part of the material. For the Mix finishes, the alternating sequence of light and dark pebbles is consistent in form but each piece has its own grain.
What if the bulb burns out? What is the warranty?
Replace with any standard E27 (screw base) LED bulb up to 10W; warm-white at 2700–3000K matches the original. The lamp itself carries a 2-year warranty against manufacturing defects in the wiring, dimmer, and socket. Email support with your order number if anything arrives damaged or fails in normal use. Surface scuffs and natural wood variation are not covered.
