Square Frame LED Sconce
A square frame LED sconce — a brushed satin-nickel square panel with a fluted acrylic disc at its center that glows warm from an integrated LED, framed by crossed metal rods that extend past each corner. A clean modern-geometric wall light. 12.6″ × 12.6″ × 2″ deep, integrated LED. For hallways, living rooms, stairwells, and entryway accent walls.
Fluted glow disc
A ribbed acrylic disc diffuses an integrated LED into a soft radiant circle of warm light.
Crossed-rod frame
Brushed satin-nickel rods cross at each corner and extend past the panel for a layered architectural edge.
Integrated LED
Built-in LED in 2700K warm white, no bulb to change. AC 110–240V universal.
Finish & diffuser
The frame and panel are stainless steel in a brushed satin-nickel finish — durable, corrosion-resistant, and consistent piece to piece. The center disc is fluted acrylic, which diffuses the LED evenly without a visible hotspot.
12.6″ × 12.6″ (32 × 32 cm) · 2″ (5 cm) deep. Click the diagram to enlarge.
Click to enlarge ↗
| Material | Stainless Steel, Acrylic |
| Body finish | Brushed satin nickel |
| Shade finish | Frosted fluted acrylic |
| Dimensions | 12.6″ × 12.6″ × 2″ deep (32 × 32 × 5 cm) |
| Light source | Integrated LED · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount, US junction box compatible |
| Moisture rating | IP20 — indoor, dry locations only |
| Control | Compatible with standard wall switch or dimmer (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. Mounts over a standard US junction box behind the panel.
- Mount the square level so the crossed rods read true horizontal and vertical; check with a level before final tightening.
- The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture.
- Dimmable with a compatible wall dimmer (not included).
- The brushed satin-nickel finish wipes clean with a soft dry or barely damp cloth; avoid abrasive pads that can dull the brushed grain.
- Indoor dry locations only (IP20). Keep clear of direct water and damp areas.
What is the center disc made of — is it glass?
It's fluted acrylic, not glass. The ribbed acrylic diffuses the integrated LED into an even, radiant circle of light without a visible hotspot, and it's lighter and more shatter-resistant than glass. The frame and panel are stainless steel in a brushed satin-nickel finish.
Is the LED replaceable?
The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Is it dimmable, and how bright is it?
Yes — the integrated LED is 2700K warm white and dimmable with a compatible wall dimmer (not included). It gives a soft ambient and accent glow rather than bright task light, so it works well in hallways, beside art, or as a living-room accent.
Can I mount it horizontally or only as a square?
It's a square, so it reads the same in any 90° rotation — the crossed-rod frame and center disc stay symmetrical. Just mount it level so the rods line up true horizontal and vertical.
Can I install it in a bathroom, and what's the warranty?
On a dry wall away from the shower, yes — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. 2-year warranty on the fixture and wiring; the LED is covered under the same warranty. Email support for help — we reply within one business day.
More Images
Square Frame LED Sconce
A square frame LED sconce — a brushed satin-nickel square panel with a fluted acrylic disc at its center that glows warm from an integrated LED, framed by crossed metal rods that extend past each corner. A clean modern-geometric wall light. 12.6″ × 12.6″ × 2″ deep, integrated LED. For hallways, living rooms, stairwells, and entryway accent walls.
Fluted glow disc
A ribbed acrylic disc diffuses an integrated LED into a soft radiant circle of warm light.
Crossed-rod frame
Brushed satin-nickel rods cross at each corner and extend past the panel for a layered architectural edge.
Integrated LED
Built-in LED in 2700K warm white, no bulb to change. AC 110–240V universal.
Finish & diffuser
The frame and panel are stainless steel in a brushed satin-nickel finish — durable, corrosion-resistant, and consistent piece to piece. The center disc is fluted acrylic, which diffuses the LED evenly without a visible hotspot.
12.6″ × 12.6″ (32 × 32 cm) · 2″ (5 cm) deep. Click the diagram to enlarge.
Click to enlarge ↗
| Material | Stainless Steel, Acrylic |
| Body finish | Brushed satin nickel |
| Shade finish | Frosted fluted acrylic |
| Dimensions | 12.6″ × 12.6″ × 2″ deep (32 × 32 × 5 cm) |
| Light source | Integrated LED · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount, US junction box compatible |
| Moisture rating | IP20 — indoor, dry locations only |
| Control | Compatible with standard wall switch or dimmer (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. Mounts over a standard US junction box behind the panel.
- Mount the square level so the crossed rods read true horizontal and vertical; check with a level before final tightening.
- The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture.
- Dimmable with a compatible wall dimmer (not included).
- The brushed satin-nickel finish wipes clean with a soft dry or barely damp cloth; avoid abrasive pads that can dull the brushed grain.
- Indoor dry locations only (IP20). Keep clear of direct water and damp areas.
What is the center disc made of — is it glass?
It's fluted acrylic, not glass. The ribbed acrylic diffuses the integrated LED into an even, radiant circle of light without a visible hotspot, and it's lighter and more shatter-resistant than glass. The frame and panel are stainless steel in a brushed satin-nickel finish.
Is the LED replaceable?
The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Is it dimmable, and how bright is it?
Yes — the integrated LED is 2700K warm white and dimmable with a compatible wall dimmer (not included). It gives a soft ambient and accent glow rather than bright task light, so it works well in hallways, beside art, or as a living-room accent.
Can I mount it horizontally or only as a square?
It's a square, so it reads the same in any 90° rotation — the crossed-rod frame and center disc stay symmetrical. Just mount it level so the rods line up true horizontal and vertical.
Can I install it in a bathroom, and what's the warranty?
On a dry wall away from the shower, yes — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. 2-year warranty on the fixture and wiring; the LED is covered under the same warranty. Email support for help — we reply within one business day.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A square frame LED sconce — a brushed satin-nickel square panel with a fluted acrylic disc at its center that glows warm from an integrated LED, framed by crossed metal rods that extend past each corner. A clean modern-geometric wall light. 12.6″ × 12.6″ × 2″ deep, integrated LED. For hallways, living rooms, stairwells, and entryway accent walls.
Fluted glow disc
A ribbed acrylic disc diffuses an integrated LED into a soft radiant circle of warm light.
Crossed-rod frame
Brushed satin-nickel rods cross at each corner and extend past the panel for a layered architectural edge.
Integrated LED
Built-in LED in 2700K warm white, no bulb to change. AC 110–240V universal.
Finish & diffuser
The frame and panel are stainless steel in a brushed satin-nickel finish — durable, corrosion-resistant, and consistent piece to piece. The center disc is fluted acrylic, which diffuses the LED evenly without a visible hotspot.
12.6″ × 12.6″ (32 × 32 cm) · 2″ (5 cm) deep. Click the diagram to enlarge.
Click to enlarge ↗
| Material | Stainless Steel, Acrylic |
| Body finish | Brushed satin nickel |
| Shade finish | Frosted fluted acrylic |
| Dimensions | 12.6″ × 12.6″ × 2″ deep (32 × 32 × 5 cm) |
| Light source | Integrated LED · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount, US junction box compatible |
| Moisture rating | IP20 — indoor, dry locations only |
| Control | Compatible with standard wall switch or dimmer (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. Mounts over a standard US junction box behind the panel.
- Mount the square level so the crossed rods read true horizontal and vertical; check with a level before final tightening.
- The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture.
- Dimmable with a compatible wall dimmer (not included).
- The brushed satin-nickel finish wipes clean with a soft dry or barely damp cloth; avoid abrasive pads that can dull the brushed grain.
- Indoor dry locations only (IP20). Keep clear of direct water and damp areas.
What is the center disc made of — is it glass?
It's fluted acrylic, not glass. The ribbed acrylic diffuses the integrated LED into an even, radiant circle of light without a visible hotspot, and it's lighter and more shatter-resistant than glass. The frame and panel are stainless steel in a brushed satin-nickel finish.
Is the LED replaceable?
The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Is it dimmable, and how bright is it?
Yes — the integrated LED is 2700K warm white and dimmable with a compatible wall dimmer (not included). It gives a soft ambient and accent glow rather than bright task light, so it works well in hallways, beside art, or as a living-room accent.
Can I mount it horizontally or only as a square?
It's a square, so it reads the same in any 90° rotation — the crossed-rod frame and center disc stay symmetrical. Just mount it level so the rods line up true horizontal and vertical.
Can I install it in a bathroom, and what's the warranty?
On a dry wall away from the shower, yes — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. 2-year warranty on the fixture and wiring; the LED is covered under the same warranty. Email support for help — we reply within one business day.
