Sculptural Plaster Cone Pendant Lamp
The Sculptural Plaster Cone-and-Disc Pendant is a small organic-modern fixture — a tapered cone shade in matte plaster white with three geometric disc accents at the rim. 17.7″ wide, 16.5″ tall. Sized for dining nooks, breakfast bars, and small entries with 9 ft ceilings.
Cone-and-disc form
A tapered cone shade with three circular disc accents floating at the rim — quiet geometry, soft plaster surface.
Hand-finished plaster look
Sculpted, sanded, and finished in matte plaster white — subtle texture variation is part of the craft.
E27 socket
Replaceable E27 socket — use any standard medium-base bulb up to 40W (or LED equivalent).
Default configuration
Resin composite over a metal armature, hand-finished matte plaster white. Hardwired ceiling mount with chain suspension. Bulb not included — uses one E27 bulb up to 40W (or LED equivalent).
Handcrafted — minor variations expected
Hand-sculpted and hand-sanded. Slight surface marks, tone variation, and texture differences from photos are normal, not defects. Email us for additional photos before ordering.
Click the diagram to enlarge.
Click to enlarge ↗
| Material | Resin composite, Metal |
| Color | Matte plaster white |
| Finish | Hand-sculpted, sanded matte plaster look |
| Light source | E27 medium-base socket · bulb not included |
| Max wattage | 40W (or LED equivalent) |
| Voltage | AC 110–240V (universal) |
| Size | Dia 45cm x H 42cm / ∅ 17.7″ x H 16.5″ |
| Mounting | Hardwired ceiling mount |
| Moisture rating | IP20 — indoor, dry locations only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired install — a licensed electrician is recommended.
- Confirm your ceiling box supports the fixture weight before installing.
- Hang the bottom 30–36″ above a dining table; allow 7 ft of floor clearance in foyers.
- Use one E27 medium-base bulb up to 40W (or LED equivalent), not included. Warm-light bulbs suit the matte plaster surface.
- Hand-finished surface — marks and texture variation are part of the craft, not defects. Dust with a soft, dry brush; do not wet or use solvents.
Is this real plaster?
The finish reads as hand-troweled plaster, but the body is resin composite over a metal armature — lighter and more durable than solid plaster, same matte textured look. Each piece is hand-sanded.
Where does it fit best?
9 ft ceilings work well — dining nooks, breakfast bars, small entries, and over a desk. Hang the cone bottom about 30–36″ above a table.
Is the bulb included?
No — uses one E27 medium-base bulb up to 40W (or LED equivalent), not included. Pick a warm-white bulb to suit the matte plaster finish.
What does “handcrafted” mean for surface quality?
Hand-sculpted and hand-sanded — expect minor marks, tone variation, and texture differences from photos. Part of the craft, not defects. If a uniform surface is critical, this piece may not suit you.
Is there a warranty?
2-year warranty on wiring, sockets or LED module, and structural finish. Hand-finish characteristics not covered; transit damage and wiring issues are. Email support with photos within 7 days of delivery.
Original: $1,680.00
-70%$1,680.00
$504.00More Images
Sculptural Plaster Cone Pendant Lamp
The Sculptural Plaster Cone-and-Disc Pendant is a small organic-modern fixture — a tapered cone shade in matte plaster white with three geometric disc accents at the rim. 17.7″ wide, 16.5″ tall. Sized for dining nooks, breakfast bars, and small entries with 9 ft ceilings.
Cone-and-disc form
A tapered cone shade with three circular disc accents floating at the rim — quiet geometry, soft plaster surface.
Hand-finished plaster look
Sculpted, sanded, and finished in matte plaster white — subtle texture variation is part of the craft.
E27 socket
Replaceable E27 socket — use any standard medium-base bulb up to 40W (or LED equivalent).
Default configuration
Resin composite over a metal armature, hand-finished matte plaster white. Hardwired ceiling mount with chain suspension. Bulb not included — uses one E27 bulb up to 40W (or LED equivalent).
Handcrafted — minor variations expected
Hand-sculpted and hand-sanded. Slight surface marks, tone variation, and texture differences from photos are normal, not defects. Email us for additional photos before ordering.
Click the diagram to enlarge.
Click to enlarge ↗
| Material | Resin composite, Metal |
| Color | Matte plaster white |
| Finish | Hand-sculpted, sanded matte plaster look |
| Light source | E27 medium-base socket · bulb not included |
| Max wattage | 40W (or LED equivalent) |
| Voltage | AC 110–240V (universal) |
| Size | Dia 45cm x H 42cm / ∅ 17.7″ x H 16.5″ |
| Mounting | Hardwired ceiling mount |
| Moisture rating | IP20 — indoor, dry locations only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired install — a licensed electrician is recommended.
- Confirm your ceiling box supports the fixture weight before installing.
- Hang the bottom 30–36″ above a dining table; allow 7 ft of floor clearance in foyers.
- Use one E27 medium-base bulb up to 40W (or LED equivalent), not included. Warm-light bulbs suit the matte plaster surface.
- Hand-finished surface — marks and texture variation are part of the craft, not defects. Dust with a soft, dry brush; do not wet or use solvents.
Is this real plaster?
The finish reads as hand-troweled plaster, but the body is resin composite over a metal armature — lighter and more durable than solid plaster, same matte textured look. Each piece is hand-sanded.
Where does it fit best?
9 ft ceilings work well — dining nooks, breakfast bars, small entries, and over a desk. Hang the cone bottom about 30–36″ above a table.
Is the bulb included?
No — uses one E27 medium-base bulb up to 40W (or LED equivalent), not included. Pick a warm-white bulb to suit the matte plaster finish.
What does “handcrafted” mean for surface quality?
Hand-sculpted and hand-sanded — expect minor marks, tone variation, and texture differences from photos. Part of the craft, not defects. If a uniform surface is critical, this piece may not suit you.
Is there a warranty?
2-year warranty on wiring, sockets or LED module, and structural finish. Hand-finish characteristics not covered; transit damage and wiring issues are. Email support with photos within 7 days of delivery.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Sculptural Plaster Cone-and-Disc Pendant is a small organic-modern fixture — a tapered cone shade in matte plaster white with three geometric disc accents at the rim. 17.7″ wide, 16.5″ tall. Sized for dining nooks, breakfast bars, and small entries with 9 ft ceilings.
Cone-and-disc form
A tapered cone shade with three circular disc accents floating at the rim — quiet geometry, soft plaster surface.
Hand-finished plaster look
Sculpted, sanded, and finished in matte plaster white — subtle texture variation is part of the craft.
E27 socket
Replaceable E27 socket — use any standard medium-base bulb up to 40W (or LED equivalent).
Default configuration
Resin composite over a metal armature, hand-finished matte plaster white. Hardwired ceiling mount with chain suspension. Bulb not included — uses one E27 bulb up to 40W (or LED equivalent).
Handcrafted — minor variations expected
Hand-sculpted and hand-sanded. Slight surface marks, tone variation, and texture differences from photos are normal, not defects. Email us for additional photos before ordering.
Click the diagram to enlarge.
Click to enlarge ↗
| Material | Resin composite, Metal |
| Color | Matte plaster white |
| Finish | Hand-sculpted, sanded matte plaster look |
| Light source | E27 medium-base socket · bulb not included |
| Max wattage | 40W (or LED equivalent) |
| Voltage | AC 110–240V (universal) |
| Size | Dia 45cm x H 42cm / ∅ 17.7″ x H 16.5″ |
| Mounting | Hardwired ceiling mount |
| Moisture rating | IP20 — indoor, dry locations only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired install — a licensed electrician is recommended.
- Confirm your ceiling box supports the fixture weight before installing.
- Hang the bottom 30–36″ above a dining table; allow 7 ft of floor clearance in foyers.
- Use one E27 medium-base bulb up to 40W (or LED equivalent), not included. Warm-light bulbs suit the matte plaster surface.
- Hand-finished surface — marks and texture variation are part of the craft, not defects. Dust with a soft, dry brush; do not wet or use solvents.
Is this real plaster?
The finish reads as hand-troweled plaster, but the body is resin composite over a metal armature — lighter and more durable than solid plaster, same matte textured look. Each piece is hand-sanded.
Where does it fit best?
9 ft ceilings work well — dining nooks, breakfast bars, small entries, and over a desk. Hang the cone bottom about 30–36″ above a table.
Is the bulb included?
No — uses one E27 medium-base bulb up to 40W (or LED equivalent), not included. Pick a warm-white bulb to suit the matte plaster finish.
What does “handcrafted” mean for surface quality?
Hand-sculpted and hand-sanded — expect minor marks, tone variation, and texture differences from photos. Part of the craft, not defects. If a uniform surface is critical, this piece may not suit you.
Is there a warranty?
2-year warranty on wiring, sockets or LED module, and structural finish. Hand-finish characteristics not covered; transit damage and wiring issues are. Email support with photos within 7 days of delivery.
