Pebble-Inlay Sculptural Plaster Table Lamp
A sculptural plaster table lamp with an asymmetric, hand-formed body set with charcoal pebble insets, topped by a pleated dome shade. The cast gypsum-resin base reads like hand-thrown stoneware and casts a warm, low glow. Standing 16.9–21.3″ tall, it works as an accent lamp on a living-room console, entryway table, or bedroom dresser. Size and finish are made to order.
Hand-formed organic body
Asymmetric gypsum-resin form with inset charcoal pebble detailing and a matte plaster surface.
E26/E27, max 12W
Standard medium-base socket. Warm 2700K LED recommended for a soft, low glow.
Made-to-order sizing
Three heights from 16.9 to 21.3″; custom base and shade finishes on request.
Pebble-inlay base detail
Default configuration
Pictured: mid height (19.3″), off-white plaster body with charcoal pebble insets and a pleated off-white dome shade.
Custom size & finish
Choose from three heights; base tone, pebble color, and shade finish can be customized. Email us your space dimensions for a made-to-order quote.
| Size | Height (overall) | Shade Dimensions | Best for |
|---|---|---|---|
| Small | 16.9″ (43 cm) | Ø 15.7″ (40 cm) | Nightstand, narrow shelf |
| Medium | 19.3″ (49 cm) | Ø 17.7″ (45 cm) | Console, dresser, end table |
| Large | 21.3″ (54 cm) | Ø 19.7″ (50 cm) | Entryway, statement corner |
Shade diameter 15.7–19.7″ (40–50 cm). All sizes made to order; intermediate sizes available on request.
| Material | Cast gypsum-resin composite body · metal hardware |
| Finish | Off-white matte plaster with inset charcoal pebble detail |
| Shade | Pleated dome shade, off-white textured fabric-look |
| Light source | E26/E27 medium base — LED or incandescent, max 12W (bulb not included) |
| Voltage | AC 110–240V |
| Switch | Inline cord switch |
| Mounting | Freestanding tabletop (plug-in) |
| Dimensions | H 16.9–21.3″ (43–54 cm) · shade Ø 15.7–19.7″ (40–50 cm) |
| Customization | Three heights; custom base & shade finish made to order |
| Certification | Certified for North America, EU, and Australia |
| Prop 65 (CA) | WARNING applies for California — see P65Warnings.ca.gov |
- Lift by the base, not the shade; the pleated dome is sculpted, not load-bearing.
- Plug-in lamp — no hardwiring. Operates from a standard wall outlet via the inline cord switch.
- Bulb not included. Use an E26/E27 LED rated 12W or less; 2700K warm white best matches the matte plaster tone.
- Set on a stable, level surface. The weighted gypsum-resin base resists tipping.
- Each piece is hand-finished — brushwork, texture, and tone vary slightly from unit to unit. This is characteristic of the process, not a defect.
- Dust with a dry, soft cloth. Avoid water, solvents, and abrasive cleaners on the plaster finish.
Is one bulb bright enough for a living room?
It takes a single E26/E27 bulb (max 12W) and is built as accent and ambient lighting, not a room’s main source. Pair it with overhead or a second lamp for full living-room coverage.
What height should I pick for a console or nightstand?
For a nightstand or narrow shelf choose 16.9″. For a console, dresser, or end table the 19.3″ mid height suits most setups. The 21.3″ large reads as a corner statement.
Can I change the base tone or pebble color?
Yes. Base tone, pebble accent color, and shade finish are made to order. Email us your preference and the height you want for a quote.
Does it need assembly or an electrician?
No. It ships ready to use as a plug-in lamp with an inline cord switch — just add an E26/E27 bulb and plug into a standard outlet.
What’s the warranty and how do I clean it?
Two-year warranty on the fixture and wiring. Dust with a dry, soft cloth; avoid water and solvents on the plaster finish. Support replies within one business day at [email protected].
Original: $399.00
-70%$399.00
$119.70More Images
Pebble-Inlay Sculptural Plaster Table Lamp
A sculptural plaster table lamp with an asymmetric, hand-formed body set with charcoal pebble insets, topped by a pleated dome shade. The cast gypsum-resin base reads like hand-thrown stoneware and casts a warm, low glow. Standing 16.9–21.3″ tall, it works as an accent lamp on a living-room console, entryway table, or bedroom dresser. Size and finish are made to order.
Hand-formed organic body
Asymmetric gypsum-resin form with inset charcoal pebble detailing and a matte plaster surface.
E26/E27, max 12W
Standard medium-base socket. Warm 2700K LED recommended for a soft, low glow.
Made-to-order sizing
Three heights from 16.9 to 21.3″; custom base and shade finishes on request.
Pebble-inlay base detail
Default configuration
Pictured: mid height (19.3″), off-white plaster body with charcoal pebble insets and a pleated off-white dome shade.
Custom size & finish
Choose from three heights; base tone, pebble color, and shade finish can be customized. Email us your space dimensions for a made-to-order quote.
| Size | Height (overall) | Shade Dimensions | Best for |
|---|---|---|---|
| Small | 16.9″ (43 cm) | Ø 15.7″ (40 cm) | Nightstand, narrow shelf |
| Medium | 19.3″ (49 cm) | Ø 17.7″ (45 cm) | Console, dresser, end table |
| Large | 21.3″ (54 cm) | Ø 19.7″ (50 cm) | Entryway, statement corner |
Shade diameter 15.7–19.7″ (40–50 cm). All sizes made to order; intermediate sizes available on request.
| Material | Cast gypsum-resin composite body · metal hardware |
| Finish | Off-white matte plaster with inset charcoal pebble detail |
| Shade | Pleated dome shade, off-white textured fabric-look |
| Light source | E26/E27 medium base — LED or incandescent, max 12W (bulb not included) |
| Voltage | AC 110–240V |
| Switch | Inline cord switch |
| Mounting | Freestanding tabletop (plug-in) |
| Dimensions | H 16.9–21.3″ (43–54 cm) · shade Ø 15.7–19.7″ (40–50 cm) |
| Customization | Three heights; custom base & shade finish made to order |
| Certification | Certified for North America, EU, and Australia |
| Prop 65 (CA) | WARNING applies for California — see P65Warnings.ca.gov |
- Lift by the base, not the shade; the pleated dome is sculpted, not load-bearing.
- Plug-in lamp — no hardwiring. Operates from a standard wall outlet via the inline cord switch.
- Bulb not included. Use an E26/E27 LED rated 12W or less; 2700K warm white best matches the matte plaster tone.
- Set on a stable, level surface. The weighted gypsum-resin base resists tipping.
- Each piece is hand-finished — brushwork, texture, and tone vary slightly from unit to unit. This is characteristic of the process, not a defect.
- Dust with a dry, soft cloth. Avoid water, solvents, and abrasive cleaners on the plaster finish.
Is one bulb bright enough for a living room?
It takes a single E26/E27 bulb (max 12W) and is built as accent and ambient lighting, not a room’s main source. Pair it with overhead or a second lamp for full living-room coverage.
What height should I pick for a console or nightstand?
For a nightstand or narrow shelf choose 16.9″. For a console, dresser, or end table the 19.3″ mid height suits most setups. The 21.3″ large reads as a corner statement.
Can I change the base tone or pebble color?
Yes. Base tone, pebble accent color, and shade finish are made to order. Email us your preference and the height you want for a quote.
Does it need assembly or an electrician?
No. It ships ready to use as a plug-in lamp with an inline cord switch — just add an E26/E27 bulb and plug into a standard outlet.
What’s the warranty and how do I clean it?
Two-year warranty on the fixture and wiring. Dust with a dry, soft cloth; avoid water and solvents on the plaster finish. Support replies within one business day at [email protected].
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A sculptural plaster table lamp with an asymmetric, hand-formed body set with charcoal pebble insets, topped by a pleated dome shade. The cast gypsum-resin base reads like hand-thrown stoneware and casts a warm, low glow. Standing 16.9–21.3″ tall, it works as an accent lamp on a living-room console, entryway table, or bedroom dresser. Size and finish are made to order.
Hand-formed organic body
Asymmetric gypsum-resin form with inset charcoal pebble detailing and a matte plaster surface.
E26/E27, max 12W
Standard medium-base socket. Warm 2700K LED recommended for a soft, low glow.
Made-to-order sizing
Three heights from 16.9 to 21.3″; custom base and shade finishes on request.
Pebble-inlay base detail
Default configuration
Pictured: mid height (19.3″), off-white plaster body with charcoal pebble insets and a pleated off-white dome shade.
Custom size & finish
Choose from three heights; base tone, pebble color, and shade finish can be customized. Email us your space dimensions for a made-to-order quote.
| Size | Height (overall) | Shade Dimensions | Best for |
|---|---|---|---|
| Small | 16.9″ (43 cm) | Ø 15.7″ (40 cm) | Nightstand, narrow shelf |
| Medium | 19.3″ (49 cm) | Ø 17.7″ (45 cm) | Console, dresser, end table |
| Large | 21.3″ (54 cm) | Ø 19.7″ (50 cm) | Entryway, statement corner |
Shade diameter 15.7–19.7″ (40–50 cm). All sizes made to order; intermediate sizes available on request.
| Material | Cast gypsum-resin composite body · metal hardware |
| Finish | Off-white matte plaster with inset charcoal pebble detail |
| Shade | Pleated dome shade, off-white textured fabric-look |
| Light source | E26/E27 medium base — LED or incandescent, max 12W (bulb not included) |
| Voltage | AC 110–240V |
| Switch | Inline cord switch |
| Mounting | Freestanding tabletop (plug-in) |
| Dimensions | H 16.9–21.3″ (43–54 cm) · shade Ø 15.7–19.7″ (40–50 cm) |
| Customization | Three heights; custom base & shade finish made to order |
| Certification | Certified for North America, EU, and Australia |
| Prop 65 (CA) | WARNING applies for California — see P65Warnings.ca.gov |
- Lift by the base, not the shade; the pleated dome is sculpted, not load-bearing.
- Plug-in lamp — no hardwiring. Operates from a standard wall outlet via the inline cord switch.
- Bulb not included. Use an E26/E27 LED rated 12W or less; 2700K warm white best matches the matte plaster tone.
- Set on a stable, level surface. The weighted gypsum-resin base resists tipping.
- Each piece is hand-finished — brushwork, texture, and tone vary slightly from unit to unit. This is characteristic of the process, not a defect.
- Dust with a dry, soft cloth. Avoid water, solvents, and abrasive cleaners on the plaster finish.
Is one bulb bright enough for a living room?
It takes a single E26/E27 bulb (max 12W) and is built as accent and ambient lighting, not a room’s main source. Pair it with overhead or a second lamp for full living-room coverage.
What height should I pick for a console or nightstand?
For a nightstand or narrow shelf choose 16.9″. For a console, dresser, or end table the 19.3″ mid height suits most setups. The 21.3″ large reads as a corner statement.
Can I change the base tone or pebble color?
Yes. Base tone, pebble accent color, and shade finish are made to order. Email us your preference and the height you want for a quote.
Does it need assembly or an electrician?
No. It ships ready to use as a plug-in lamp with an inline cord switch — just add an E26/E27 bulb and plug into a standard outlet.
What’s the warranty and how do I clean it?
Two-year warranty on the fixture and wiring. Dust with a dry, soft cloth; avoid water and solvents on the plaster finish. Support replies within one business day at [email protected].
