🎉 Up to 70% Off Selected ItemsShop Sale
Lyra Alabaster Wall Sconce
HomeStore

Lyra Alabaster Wall Sconce

Lyra Alabaster Wall Sconce

SOLID ALABASTER · BRONZE-FINISH HARDWARE · 63″ VERTICAL · HARDWIRED · INTEGRATED LED

A 63-inch alabaster capsule with a slim bronze spine — a vertical sconce designed to flank tall mirrors and stairwells

Lyra is a vertical wall sconce built around a 63-inch alabaster capsule — translucent stone that glows softly across its full length when lit. A slim bronze-finish steel spine runs down its center, anchored at four bronze disc points to the wall. Hardwired installation by a licensed electrician.

Sized for tall mirror flanking, stairwell pairings, and dramatic entry foyers — anywhere a single statement vertical light reads better than a row of shorter sconces. The capsule is just 7.1″ wide and 4.3″ deep, so it sits flat against most architectural walls.



Solid Alabaster Capsule

Cut from natural alabaster — translucent stone with fibrous veining unique to each piece. Glows softly along its full 63-inch length.


Bronze-Finish Spine

Slim vertical bronze-finish steel spine with four disc anchor points — provides architectural rhythm against the soft glow of the alabaster.


Hardwired Installation

Connects to a standard junction box — requires a licensed electrician. Integrated LED with ~50,000 hour rated life.


What it's made of

Capsule
Solid natural alabaster — translucent, hand-cut, fibrous veining unique to each piece
Hardware
Bronze-finish steel — spine, disc anchors, and wall mount
Light Source
Integrated LED strip distributed along the inner capsule
Each alabaster capsule is one-of-a-kind. Alabaster is natural translucent stone formed over millennia — fibrous veining direction, tonal warmth, and translucency vary between every piece we cut.
About the bronze-finish hardware. The spine, disc anchors, and wall mount are bronze-finish steel — not solid bronze. The antique-bronze tone is a durable powder-coated finish.

Installation

HARDWIRED · LICENSED ELECTRICIAN REQUIRED
Junction Box Installation
Lyra connects to a standard recessed junction box. Total fixture weight is approximately 12 lb (5.5 kg). The wall mount is anchored at the top, with three additional disc points stabilizing the 63-inch length. We recommend installation by a licensed electrician.
Renovating? Best installed during electrical rough-in. For retrofitting, your electrician may need 30-60 minutes per sconce to secure the anchoring system.

Color temperature

DEFAULT
3000 K Warm White
Soft amber-toned glow that complements the natural cream of alabaster. Integrated LED strip distributed along the full length. Rated for roughly 50,000 hours.
Need a different color temperature? 4000 K neutral or 6000 K cool white available on request — message us before placing your order.

Dimensions

Width 18 cm / 7.1″
Height 160 cm / 63″
Depth 11 cm / 4.3″
Weight ~5.5 kg / 12 lb

Specifications

Capsule Solid natural alabaster — single-piece
Hardware Bronze-finish steel — spine, four disc anchors, wall mount
Width 18 cm / 7.1″
Height 160 cm / 63″
Depth 11 cm / 4.3″
Weight ~5.5 kg / 12 lb
Light Source Integrated LED strip · ~50,000 hours rated life
Color Temperature 3000 K (default) · 4000 K / 6000 K on request
Voltage AC 110–240 V worldwide
Installation Hardwired — licensed electrician required
Environment Indoor — damp-rated for bathroom away from direct spray
Certifications North America · Saudi Arabia · Europe · Australia

Downloads

Spec Sheet

Frequently asked

Where does Lyra look best?
Flanking tall bathroom mirrors, side of a stairwell landing, or framing a grand entry foyer. It needs vertical "breathing room" to read correctly.
Can I dim this light?
Yes, Lyra is compatible with most Triac-based wall dimmers. Smart dimmers like Lutron Caséta work as well.
How do I clean it?
Wipe gently with a soft dry cloth. For deep cleaning of stone, a slightly damp cloth with water only. Avoid acidic cleaners.
Is it certified for global use?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
$324.00

Original: $1,080.00

-70%
Lyra Alabaster Wall Sconce

$1,080.00

$324.00

More Images

Lyra Alabaster Wall Sconce - Image 2
Lyra Alabaster Wall Sconce - Image 3
Lyra Alabaster Wall Sconce - Image 4
Lyra Alabaster Wall Sconce - Image 5
Lyra Alabaster Wall Sconce - Image 6

Lyra Alabaster Wall Sconce

SOLID ALABASTER · BRONZE-FINISH HARDWARE · 63″ VERTICAL · HARDWIRED · INTEGRATED LED

A 63-inch alabaster capsule with a slim bronze spine — a vertical sconce designed to flank tall mirrors and stairwells

Lyra is a vertical wall sconce built around a 63-inch alabaster capsule — translucent stone that glows softly across its full length when lit. A slim bronze-finish steel spine runs down its center, anchored at four bronze disc points to the wall. Hardwired installation by a licensed electrician.

Sized for tall mirror flanking, stairwell pairings, and dramatic entry foyers — anywhere a single statement vertical light reads better than a row of shorter sconces. The capsule is just 7.1″ wide and 4.3″ deep, so it sits flat against most architectural walls.



Solid Alabaster Capsule

Cut from natural alabaster — translucent stone with fibrous veining unique to each piece. Glows softly along its full 63-inch length.


Bronze-Finish Spine

Slim vertical bronze-finish steel spine with four disc anchor points — provides architectural rhythm against the soft glow of the alabaster.


Hardwired Installation

Connects to a standard junction box — requires a licensed electrician. Integrated LED with ~50,000 hour rated life.


What it's made of

Capsule
Solid natural alabaster — translucent, hand-cut, fibrous veining unique to each piece
Hardware
Bronze-finish steel — spine, disc anchors, and wall mount
Light Source
Integrated LED strip distributed along the inner capsule
Each alabaster capsule is one-of-a-kind. Alabaster is natural translucent stone formed over millennia — fibrous veining direction, tonal warmth, and translucency vary between every piece we cut.
About the bronze-finish hardware. The spine, disc anchors, and wall mount are bronze-finish steel — not solid bronze. The antique-bronze tone is a durable powder-coated finish.

Installation

HARDWIRED · LICENSED ELECTRICIAN REQUIRED
Junction Box Installation
Lyra connects to a standard recessed junction box. Total fixture weight is approximately 12 lb (5.5 kg). The wall mount is anchored at the top, with three additional disc points stabilizing the 63-inch length. We recommend installation by a licensed electrician.
Renovating? Best installed during electrical rough-in. For retrofitting, your electrician may need 30-60 minutes per sconce to secure the anchoring system.

Color temperature

DEFAULT
3000 K Warm White
Soft amber-toned glow that complements the natural cream of alabaster. Integrated LED strip distributed along the full length. Rated for roughly 50,000 hours.
Need a different color temperature? 4000 K neutral or 6000 K cool white available on request — message us before placing your order.

Dimensions

Width 18 cm / 7.1″
Height 160 cm / 63″
Depth 11 cm / 4.3″
Weight ~5.5 kg / 12 lb

Specifications

Capsule Solid natural alabaster — single-piece
Hardware Bronze-finish steel — spine, four disc anchors, wall mount
Width 18 cm / 7.1″
Height 160 cm / 63″
Depth 11 cm / 4.3″
Weight ~5.5 kg / 12 lb
Light Source Integrated LED strip · ~50,000 hours rated life
Color Temperature 3000 K (default) · 4000 K / 6000 K on request
Voltage AC 110–240 V worldwide
Installation Hardwired — licensed electrician required
Environment Indoor — damp-rated for bathroom away from direct spray
Certifications North America · Saudi Arabia · Europe · Australia

Downloads

Spec Sheet

Frequently asked

Where does Lyra look best?
Flanking tall bathroom mirrors, side of a stairwell landing, or framing a grand entry foyer. It needs vertical "breathing room" to read correctly.
Can I dim this light?
Yes, Lyra is compatible with most Triac-based wall dimmers. Smart dimmers like Lutron Caséta work as well.
How do I clean it?
Wipe gently with a soft dry cloth. For deep cleaning of stone, a slightly damp cloth with water only. Avoid acidic cleaners.
Is it certified for global use?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.

Product Information

Shipping & Returns

Description

SOLID ALABASTER · BRONZE-FINISH HARDWARE · 63″ VERTICAL · HARDWIRED · INTEGRATED LED

A 63-inch alabaster capsule with a slim bronze spine — a vertical sconce designed to flank tall mirrors and stairwells

Lyra is a vertical wall sconce built around a 63-inch alabaster capsule — translucent stone that glows softly across its full length when lit. A slim bronze-finish steel spine runs down its center, anchored at four bronze disc points to the wall. Hardwired installation by a licensed electrician.

Sized for tall mirror flanking, stairwell pairings, and dramatic entry foyers — anywhere a single statement vertical light reads better than a row of shorter sconces. The capsule is just 7.1″ wide and 4.3″ deep, so it sits flat against most architectural walls.



Solid Alabaster Capsule

Cut from natural alabaster — translucent stone with fibrous veining unique to each piece. Glows softly along its full 63-inch length.


Bronze-Finish Spine

Slim vertical bronze-finish steel spine with four disc anchor points — provides architectural rhythm against the soft glow of the alabaster.


Hardwired Installation

Connects to a standard junction box — requires a licensed electrician. Integrated LED with ~50,000 hour rated life.


What it's made of

Capsule
Solid natural alabaster — translucent, hand-cut, fibrous veining unique to each piece
Hardware
Bronze-finish steel — spine, disc anchors, and wall mount
Light Source
Integrated LED strip distributed along the inner capsule
Each alabaster capsule is one-of-a-kind. Alabaster is natural translucent stone formed over millennia — fibrous veining direction, tonal warmth, and translucency vary between every piece we cut.
About the bronze-finish hardware. The spine, disc anchors, and wall mount are bronze-finish steel — not solid bronze. The antique-bronze tone is a durable powder-coated finish.

Installation

HARDWIRED · LICENSED ELECTRICIAN REQUIRED
Junction Box Installation
Lyra connects to a standard recessed junction box. Total fixture weight is approximately 12 lb (5.5 kg). The wall mount is anchored at the top, with three additional disc points stabilizing the 63-inch length. We recommend installation by a licensed electrician.
Renovating? Best installed during electrical rough-in. For retrofitting, your electrician may need 30-60 minutes per sconce to secure the anchoring system.

Color temperature

DEFAULT
3000 K Warm White
Soft amber-toned glow that complements the natural cream of alabaster. Integrated LED strip distributed along the full length. Rated for roughly 50,000 hours.
Need a different color temperature? 4000 K neutral or 6000 K cool white available on request — message us before placing your order.

Dimensions

Width 18 cm / 7.1″
Height 160 cm / 63″
Depth 11 cm / 4.3″
Weight ~5.5 kg / 12 lb

Specifications

Capsule Solid natural alabaster — single-piece
Hardware Bronze-finish steel — spine, four disc anchors, wall mount
Width 18 cm / 7.1″
Height 160 cm / 63″
Depth 11 cm / 4.3″
Weight ~5.5 kg / 12 lb
Light Source Integrated LED strip · ~50,000 hours rated life
Color Temperature 3000 K (default) · 4000 K / 6000 K on request
Voltage AC 110–240 V worldwide
Installation Hardwired — licensed electrician required
Environment Indoor — damp-rated for bathroom away from direct spray
Certifications North America · Saudi Arabia · Europe · Australia

Downloads

Spec Sheet

Frequently asked

Where does Lyra look best?
Flanking tall bathroom mirrors, side of a stairwell landing, or framing a grand entry foyer. It needs vertical "breathing room" to read correctly.
Can I dim this light?
Yes, Lyra is compatible with most Triac-based wall dimmers. Smart dimmers like Lutron Caséta work as well.
How do I clean it?
Wipe gently with a soft dry cloth. For deep cleaning of stone, a slightly damp cloth with water only. Avoid acidic cleaners.
Is it certified for global use?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.