Long Swing Arm Wall Lamp
A bold, long-reach swing-arm wall lamp with a stripped industrial look — a slim metal arm that pivots out from the wall, a small adjustable aluminum reflector at the tip, and a tapered counterweight at the elbow. Two sizes: 53.2″ and 80.7″ of reach. Hardwired ceiling-style install, no exposed cord. For commercial spaces, lofts, large studios, and over-bed or over-sofa reading.
Long swing-arm reach
53″ or 80″ horizontal reach — the arm pivots and folds against the wall when not in use.
Adjustable reflector
Small aluminum reflector tilts at the arm tip — aim the beam at a book, a table, or the wall.
Hardwired clean install
Wires through the wall to a junction box — no exposed cord, no plug, no cable to manage.
| Size | Reach | Arm height | Best for |
|---|---|---|---|
| Small | 53.2″ (135 cm) | 10.2″ (26 cm) | Bedside, reading nook, small office |
| Large | 80.7″ (205 cm) | 13.8″ (35 cm) | Over sofa, dining table, large loft |
| Material | Metal, Iron, Aluminum |
| Arm | Painted metal, adjustable swing-arm |
| Reflector | Small painted aluminum, tilt-adjustable |
| Light source | One E26/E27 medium-base bulb · max 60W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Color | Black, white, or colors on request |
| Power | AC 110–240V; hardwired over a standard junction box |
| Mounting | Wall, hardwired (no plug, no exposed cord) |
| Use | IP20 indoor and dry locations only |
Click any diagram to enlarge the dimensions for each size.
🔍 Click any thumbnail to open full size in a new tab
Hardwired install — licensed electrician recommended
This wall lamp wires through the wall to a standard junction box; there is no plug or exposed cord. Plan the junction-box location before ordering, especially for the 80″ Large size — the wall plate should sit where you want the long arm anchored.
- Hardwired wall mount over a standard junction box — a licensed electrician is recommended. Confirm the wall plate location before ordering, particularly for the long-reach version.
- Use one E26/E27 LED bulb up to 60W equivalent. Bulb not included.
- The arm pivots horizontally and the reflector tilts at the joint. Move slowly when adjusting — the painted finish on the arm and reflector can scuff against the wall.
- Indoor and dry locations only (IP20). Not for bathrooms with shower exposure, kitchens with steam, or outdoor use.
- Wipe the metal arm and reflector with a soft, dry cloth. Avoid solvents on the painted finish.
Which size should I pick?
The 53″ Small is for bedside, reading nooks, and small offices — about the reach you'd want over a single bed or armchair. The 80″ Large is sized for a full sofa, dining table, or a tall loft wall where the long arm becomes a graphic statement. Measure the wall and the throw distance before choosing.
Is it really hardwired? No plug?
Yes — wires run through the wall to a junction box. No plug, no exposed cord. Plan the box location before ordering, especially for the long-reach size. A licensed electrician is recommended for install.
What bulb does it take?
One E26/E27 medium-base bulb, max 60W (or LED equivalent), not included. We recommend a warm-white LED — soft light and low heat at the small aluminum reflector.
Can it be used over a dining table or sofa?
Yes — the 80″ Large is sized for it. Mount the wall plate so the arm reaches over the center of the table or sofa, then aim the reflector down. Allow the arm to fold flush against the wall when not in use.
Is there a warranty?
2-year warranty on wiring, socket, and structural finish. Painted-finish scuffs from arm-against-wall movement during use are not defects. Email support with photos within 7 days of delivery for any transit damage.
Original: $695.00
-70%$695.00
$208.50More Images
Long Swing Arm Wall Lamp
A bold, long-reach swing-arm wall lamp with a stripped industrial look — a slim metal arm that pivots out from the wall, a small adjustable aluminum reflector at the tip, and a tapered counterweight at the elbow. Two sizes: 53.2″ and 80.7″ of reach. Hardwired ceiling-style install, no exposed cord. For commercial spaces, lofts, large studios, and over-bed or over-sofa reading.
Long swing-arm reach
53″ or 80″ horizontal reach — the arm pivots and folds against the wall when not in use.
Adjustable reflector
Small aluminum reflector tilts at the arm tip — aim the beam at a book, a table, or the wall.
Hardwired clean install
Wires through the wall to a junction box — no exposed cord, no plug, no cable to manage.
| Size | Reach | Arm height | Best for |
|---|---|---|---|
| Small | 53.2″ (135 cm) | 10.2″ (26 cm) | Bedside, reading nook, small office |
| Large | 80.7″ (205 cm) | 13.8″ (35 cm) | Over sofa, dining table, large loft |
| Material | Metal, Iron, Aluminum |
| Arm | Painted metal, adjustable swing-arm |
| Reflector | Small painted aluminum, tilt-adjustable |
| Light source | One E26/E27 medium-base bulb · max 60W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Color | Black, white, or colors on request |
| Power | AC 110–240V; hardwired over a standard junction box |
| Mounting | Wall, hardwired (no plug, no exposed cord) |
| Use | IP20 indoor and dry locations only |
Click any diagram to enlarge the dimensions for each size.
🔍 Click any thumbnail to open full size in a new tab
Hardwired install — licensed electrician recommended
This wall lamp wires through the wall to a standard junction box; there is no plug or exposed cord. Plan the junction-box location before ordering, especially for the 80″ Large size — the wall plate should sit where you want the long arm anchored.
- Hardwired wall mount over a standard junction box — a licensed electrician is recommended. Confirm the wall plate location before ordering, particularly for the long-reach version.
- Use one E26/E27 LED bulb up to 60W equivalent. Bulb not included.
- The arm pivots horizontally and the reflector tilts at the joint. Move slowly when adjusting — the painted finish on the arm and reflector can scuff against the wall.
- Indoor and dry locations only (IP20). Not for bathrooms with shower exposure, kitchens with steam, or outdoor use.
- Wipe the metal arm and reflector with a soft, dry cloth. Avoid solvents on the painted finish.
Which size should I pick?
The 53″ Small is for bedside, reading nooks, and small offices — about the reach you'd want over a single bed or armchair. The 80″ Large is sized for a full sofa, dining table, or a tall loft wall where the long arm becomes a graphic statement. Measure the wall and the throw distance before choosing.
Is it really hardwired? No plug?
Yes — wires run through the wall to a junction box. No plug, no exposed cord. Plan the box location before ordering, especially for the long-reach size. A licensed electrician is recommended for install.
What bulb does it take?
One E26/E27 medium-base bulb, max 60W (or LED equivalent), not included. We recommend a warm-white LED — soft light and low heat at the small aluminum reflector.
Can it be used over a dining table or sofa?
Yes — the 80″ Large is sized for it. Mount the wall plate so the arm reaches over the center of the table or sofa, then aim the reflector down. Allow the arm to fold flush against the wall when not in use.
Is there a warranty?
2-year warranty on wiring, socket, and structural finish. Painted-finish scuffs from arm-against-wall movement during use are not defects. Email support with photos within 7 days of delivery for any transit damage.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A bold, long-reach swing-arm wall lamp with a stripped industrial look — a slim metal arm that pivots out from the wall, a small adjustable aluminum reflector at the tip, and a tapered counterweight at the elbow. Two sizes: 53.2″ and 80.7″ of reach. Hardwired ceiling-style install, no exposed cord. For commercial spaces, lofts, large studios, and over-bed or over-sofa reading.
Long swing-arm reach
53″ or 80″ horizontal reach — the arm pivots and folds against the wall when not in use.
Adjustable reflector
Small aluminum reflector tilts at the arm tip — aim the beam at a book, a table, or the wall.
Hardwired clean install
Wires through the wall to a junction box — no exposed cord, no plug, no cable to manage.
| Size | Reach | Arm height | Best for |
|---|---|---|---|
| Small | 53.2″ (135 cm) | 10.2″ (26 cm) | Bedside, reading nook, small office |
| Large | 80.7″ (205 cm) | 13.8″ (35 cm) | Over sofa, dining table, large loft |
| Material | Metal, Iron, Aluminum |
| Arm | Painted metal, adjustable swing-arm |
| Reflector | Small painted aluminum, tilt-adjustable |
| Light source | One E26/E27 medium-base bulb · max 60W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Color | Black, white, or colors on request |
| Power | AC 110–240V; hardwired over a standard junction box |
| Mounting | Wall, hardwired (no plug, no exposed cord) |
| Use | IP20 indoor and dry locations only |
Click any diagram to enlarge the dimensions for each size.
🔍 Click any thumbnail to open full size in a new tab
Hardwired install — licensed electrician recommended
This wall lamp wires through the wall to a standard junction box; there is no plug or exposed cord. Plan the junction-box location before ordering, especially for the 80″ Large size — the wall plate should sit where you want the long arm anchored.
- Hardwired wall mount over a standard junction box — a licensed electrician is recommended. Confirm the wall plate location before ordering, particularly for the long-reach version.
- Use one E26/E27 LED bulb up to 60W equivalent. Bulb not included.
- The arm pivots horizontally and the reflector tilts at the joint. Move slowly when adjusting — the painted finish on the arm and reflector can scuff against the wall.
- Indoor and dry locations only (IP20). Not for bathrooms with shower exposure, kitchens with steam, or outdoor use.
- Wipe the metal arm and reflector with a soft, dry cloth. Avoid solvents on the painted finish.
Which size should I pick?
The 53″ Small is for bedside, reading nooks, and small offices — about the reach you'd want over a single bed or armchair. The 80″ Large is sized for a full sofa, dining table, or a tall loft wall where the long arm becomes a graphic statement. Measure the wall and the throw distance before choosing.
Is it really hardwired? No plug?
Yes — wires run through the wall to a junction box. No plug, no exposed cord. Plan the box location before ordering, especially for the long-reach size. A licensed electrician is recommended for install.
What bulb does it take?
One E26/E27 medium-base bulb, max 60W (or LED equivalent), not included. We recommend a warm-white LED — soft light and low heat at the small aluminum reflector.
Can it be used over a dining table or sofa?
Yes — the 80″ Large is sized for it. Mount the wall plate so the arm reaches over the center of the table or sofa, then aim the reflector down. Allow the arm to fold flush against the wall when not in use.
Is there a warranty?
2-year warranty on wiring, socket, and structural finish. Painted-finish scuffs from arm-against-wall movement during use are not defects. Email support with photos within 7 days of delivery for any transit damage.
