Adjustable Travertine Dome Vanity Light
An adjustable travertine dome vanity light — hand-carved natural-travertine dome shades on a walnut-wood backplate, each head on a black swivel joint you can angle where the light is needed. Available in 2, 3, and 4-head bars from 12.6″ to 27.6″ wide. Integrated LED, 5W per head. For bathroom vanities, mirrors, hallways, and as directional wall accent lighting.
Adjustable swivel heads
Each travertine dome tilts and rotates on a black joint — aim light at a mirror, artwork, or down a hallway.
Natural travertine domes
Hand-carved stone with open pores and color banding — every dome reads slightly differently.
Walnut backplate · integrated LED
Real walnut-wood bar with 5W integrated LED per head, 2700K warm white. AC 110–240V.
Head count
2, 3, or 4 adjustable travertine domes on a single walnut bar.
Mounting direction
Mounts horizontally above a mirror, or vertically beside one. Heads aim either way.
Default configuration
Pictured: walnut-wood backplate, natural travertine domes, black swivel joints. Heads ship centered and are aimed on installation.
Custom finish
Backplate: walnut wood (default) or natural oak. Joint hardware: matte black (default) or brushed brass. Email us to confirm finishes before ordering.
| Heads | Width | Projection | Metric (W × D × H) |
|---|---|---|---|
| 2-head | 12.6″ | 6.7″ off wall | 32 × 6 × 17 cm |
| 3-head | 20.1″ | 6.7″ off wall | 51 × 6 × 17 cm |
| 4-head | 27.6″ | 6.7″ off wall | 70 × 6 × 17 cm |
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Natural travertine domes · walnut-wood backplate · black metal joints |
| Sizes | 2-head 12.6″ · 3-head 20.1″ · 4-head 27.6″ — see Sizes table |
| Projection | 6.7″ (17 cm) off the wall |
| Light source | Integrated LED · 5W per head · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Adjustability | Each head tilts and swivels on a black joint |
| Mounting | Hardwired wall mount, horizontal or vertical |
| Moisture rating | IP20 — indoor, dry locations only |
| Backplate finish | Walnut wood (default); natural oak on request |
| Stone finish | Natural travertine, hand-carved (open pores and color banding vary by piece) |
| Control | Compatible with common dimmers (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. Mounts horizontally above a mirror or vertically beside one.
- Mount over a standard wall junction box; the walnut backplate covers the box. Confirm box position against the bar length before install.
- Each head tilts and swivels — aim the domes after mounting to light a mirror, a vanity, or graze a textured wall.
- Travertine is a porous natural stone — open cavities, surface pitting, and color banding are core characteristics of the material, not flaws or damage. No two domes are identical.
- The walnut backplate is real wood — grain pattern and tone vary by piece, and the photograph shows a representative sample.
- Indoor dry locations only (IP20). For a bathroom, mount well clear of the shower or tub spray zone — travertine is porous and absorbs moisture, and the LED is not wet-rated.
Can I really aim each head? How far do they move?
Yes — each travertine dome sits on a black swivel joint that both tilts up and down and rotates side to side, so you can point light at a mirror, wash it down a wall, or angle it onto artwork. Aim the heads after the bar is mounted; they hold their position once set.
Which size fits my mirror or vanity?
As a rule of thumb, pick a bar about 75% of your mirror width. 2-head (12.6″) suits a small mirror or powder room; 3-head (20.1″) suits a standard 24–30″ vanity; 4-head (27.6″) suits a 36″+ vanity or a double sink. Email us your mirror width if you're unsure.
Can I install it in a bathroom?
Yes, on a vanity wall clear of direct water. It's rated IP20 for indoor dry locations — fine above a mirror or sink, but keep it out of the shower or tub spray zone. Travertine is porous and absorbs moisture, which stains the stone over time, so it isn't suited to a wet zone.
The travertine domes have holes and pits — is that a defect?
No — those are natural to travertine. Open cavities, surface pitting, and color banding are core characteristics of the stone, not flaws or shipping damage. Each dome is hand-carved, so no two are exactly alike; that variation is the point of a natural-stone fixture.
What's the LED lifespan, and what happens when it fails?
Each head has a 5W integrated LED rated over 30,000 hours — roughly 25 years at 3 hours of daily use. If a head fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
More Images
Adjustable Travertine Dome Vanity Light
An adjustable travertine dome vanity light — hand-carved natural-travertine dome shades on a walnut-wood backplate, each head on a black swivel joint you can angle where the light is needed. Available in 2, 3, and 4-head bars from 12.6″ to 27.6″ wide. Integrated LED, 5W per head. For bathroom vanities, mirrors, hallways, and as directional wall accent lighting.
Adjustable swivel heads
Each travertine dome tilts and rotates on a black joint — aim light at a mirror, artwork, or down a hallway.
Natural travertine domes
Hand-carved stone with open pores and color banding — every dome reads slightly differently.
Walnut backplate · integrated LED
Real walnut-wood bar with 5W integrated LED per head, 2700K warm white. AC 110–240V.
Head count
2, 3, or 4 adjustable travertine domes on a single walnut bar.
Mounting direction
Mounts horizontally above a mirror, or vertically beside one. Heads aim either way.
Default configuration
Pictured: walnut-wood backplate, natural travertine domes, black swivel joints. Heads ship centered and are aimed on installation.
Custom finish
Backplate: walnut wood (default) or natural oak. Joint hardware: matte black (default) or brushed brass. Email us to confirm finishes before ordering.
| Heads | Width | Projection | Metric (W × D × H) |
|---|---|---|---|
| 2-head | 12.6″ | 6.7″ off wall | 32 × 6 × 17 cm |
| 3-head | 20.1″ | 6.7″ off wall | 51 × 6 × 17 cm |
| 4-head | 27.6″ | 6.7″ off wall | 70 × 6 × 17 cm |
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Natural travertine domes · walnut-wood backplate · black metal joints |
| Sizes | 2-head 12.6″ · 3-head 20.1″ · 4-head 27.6″ — see Sizes table |
| Projection | 6.7″ (17 cm) off the wall |
| Light source | Integrated LED · 5W per head · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Adjustability | Each head tilts and swivels on a black joint |
| Mounting | Hardwired wall mount, horizontal or vertical |
| Moisture rating | IP20 — indoor, dry locations only |
| Backplate finish | Walnut wood (default); natural oak on request |
| Stone finish | Natural travertine, hand-carved (open pores and color banding vary by piece) |
| Control | Compatible with common dimmers (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. Mounts horizontally above a mirror or vertically beside one.
- Mount over a standard wall junction box; the walnut backplate covers the box. Confirm box position against the bar length before install.
- Each head tilts and swivels — aim the domes after mounting to light a mirror, a vanity, or graze a textured wall.
- Travertine is a porous natural stone — open cavities, surface pitting, and color banding are core characteristics of the material, not flaws or damage. No two domes are identical.
- The walnut backplate is real wood — grain pattern and tone vary by piece, and the photograph shows a representative sample.
- Indoor dry locations only (IP20). For a bathroom, mount well clear of the shower or tub spray zone — travertine is porous and absorbs moisture, and the LED is not wet-rated.
Can I really aim each head? How far do they move?
Yes — each travertine dome sits on a black swivel joint that both tilts up and down and rotates side to side, so you can point light at a mirror, wash it down a wall, or angle it onto artwork. Aim the heads after the bar is mounted; they hold their position once set.
Which size fits my mirror or vanity?
As a rule of thumb, pick a bar about 75% of your mirror width. 2-head (12.6″) suits a small mirror or powder room; 3-head (20.1″) suits a standard 24–30″ vanity; 4-head (27.6″) suits a 36″+ vanity or a double sink. Email us your mirror width if you're unsure.
Can I install it in a bathroom?
Yes, on a vanity wall clear of direct water. It's rated IP20 for indoor dry locations — fine above a mirror or sink, but keep it out of the shower or tub spray zone. Travertine is porous and absorbs moisture, which stains the stone over time, so it isn't suited to a wet zone.
The travertine domes have holes and pits — is that a defect?
No — those are natural to travertine. Open cavities, surface pitting, and color banding are core characteristics of the stone, not flaws or shipping damage. Each dome is hand-carved, so no two are exactly alike; that variation is the point of a natural-stone fixture.
What's the LED lifespan, and what happens when it fails?
Each head has a 5W integrated LED rated over 30,000 hours — roughly 25 years at 3 hours of daily use. If a head fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
An adjustable travertine dome vanity light — hand-carved natural-travertine dome shades on a walnut-wood backplate, each head on a black swivel joint you can angle where the light is needed. Available in 2, 3, and 4-head bars from 12.6″ to 27.6″ wide. Integrated LED, 5W per head. For bathroom vanities, mirrors, hallways, and as directional wall accent lighting.
Adjustable swivel heads
Each travertine dome tilts and rotates on a black joint — aim light at a mirror, artwork, or down a hallway.
Natural travertine domes
Hand-carved stone with open pores and color banding — every dome reads slightly differently.
Walnut backplate · integrated LED
Real walnut-wood bar with 5W integrated LED per head, 2700K warm white. AC 110–240V.
Head count
2, 3, or 4 adjustable travertine domes on a single walnut bar.
Mounting direction
Mounts horizontally above a mirror, or vertically beside one. Heads aim either way.
Default configuration
Pictured: walnut-wood backplate, natural travertine domes, black swivel joints. Heads ship centered and are aimed on installation.
Custom finish
Backplate: walnut wood (default) or natural oak. Joint hardware: matte black (default) or brushed brass. Email us to confirm finishes before ordering.
| Heads | Width | Projection | Metric (W × D × H) |
|---|---|---|---|
| 2-head | 12.6″ | 6.7″ off wall | 32 × 6 × 17 cm |
| 3-head | 20.1″ | 6.7″ off wall | 51 × 6 × 17 cm |
| 4-head | 27.6″ | 6.7″ off wall | 70 × 6 × 17 cm |
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Natural travertine domes · walnut-wood backplate · black metal joints |
| Sizes | 2-head 12.6″ · 3-head 20.1″ · 4-head 27.6″ — see Sizes table |
| Projection | 6.7″ (17 cm) off the wall |
| Light source | Integrated LED · 5W per head · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Adjustability | Each head tilts and swivels on a black joint |
| Mounting | Hardwired wall mount, horizontal or vertical |
| Moisture rating | IP20 — indoor, dry locations only |
| Backplate finish | Walnut wood (default); natural oak on request |
| Stone finish | Natural travertine, hand-carved (open pores and color banding vary by piece) |
| Control | Compatible with common dimmers (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. Mounts horizontally above a mirror or vertically beside one.
- Mount over a standard wall junction box; the walnut backplate covers the box. Confirm box position against the bar length before install.
- Each head tilts and swivels — aim the domes after mounting to light a mirror, a vanity, or graze a textured wall.
- Travertine is a porous natural stone — open cavities, surface pitting, and color banding are core characteristics of the material, not flaws or damage. No two domes are identical.
- The walnut backplate is real wood — grain pattern and tone vary by piece, and the photograph shows a representative sample.
- Indoor dry locations only (IP20). For a bathroom, mount well clear of the shower or tub spray zone — travertine is porous and absorbs moisture, and the LED is not wet-rated.
Can I really aim each head? How far do they move?
Yes — each travertine dome sits on a black swivel joint that both tilts up and down and rotates side to side, so you can point light at a mirror, wash it down a wall, or angle it onto artwork. Aim the heads after the bar is mounted; they hold their position once set.
Which size fits my mirror or vanity?
As a rule of thumb, pick a bar about 75% of your mirror width. 2-head (12.6″) suits a small mirror or powder room; 3-head (20.1″) suits a standard 24–30″ vanity; 4-head (27.6″) suits a 36″+ vanity or a double sink. Email us your mirror width if you're unsure.
Can I install it in a bathroom?
Yes, on a vanity wall clear of direct water. It's rated IP20 for indoor dry locations — fine above a mirror or sink, but keep it out of the shower or tub spray zone. Travertine is porous and absorbs moisture, which stains the stone over time, so it isn't suited to a wet zone.
The travertine domes have holes and pits — is that a defect?
No — those are natural to travertine. Open cavities, surface pitting, and color banding are core characteristics of the stone, not flaws or shipping damage. Each dome is hand-carved, so no two are exactly alike; that variation is the point of a natural-stone fixture.
What's the LED lifespan, and what happens when it fails?
Each head has a 5W integrated LED rated over 30,000 hours — roughly 25 years at 3 hours of daily use. If a head fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
